IT-Tests.com EMC E20-335 exam practice questions and answers

Now there are many IT professionals in the world and the competition of IT industry is very fierce. So many IT professionals will choose to participate in the IT certification exam to improve their position in the IT industry. E20-335 exam is a very important EMC's certification exam. But if you want to get a EMC certification, you must pass the exam.

If you don't purchase any course, although you spend a lot of time and effort to review of knowledge to prepare for EMC certification E20-335 exam, it is still risky for you to pass the exam. But selecting IT-Tests's products allows you to spend a small amount of money and time and safely pass the exam. I believe that IT-Tests.com is more suitable for your choice in the society where time is so valuable. Moreover, our IT-Tests.com a distinct website which can give you a guarantee among many similar sites. Choosing IT-Tests.com is equivalent to choose success.

Exam Code: E20-335
Exam Name: EMC (Symmetrix Solutions Specialist Exam for Implementation Engineers)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 105 Questions and Answers
Last Update: 2013-09-25

IT-Tests.com is a professional website. It can give each candidate to provide high-quality services, including pre-sales service and after-sales service. If you need IT-Tests.com's EMC E20-335 exam training materials, you can use part of our free questions and answers as a trial to sure that it is suitable for you. So you can personally check the quality of the IT-Tests.com EMC E20-335 exam training materials, and then decide to buy it. If you did not pass the exam unfortunately, we will refund the full cost of your purchase. Moreover, we can give you a year of free updates until you pass the exam.

Someone asked, where is success? Then I tell you, success is in IT-Tests.com. Select IT-Tests.com is to choose success. IT-Tests.com's EMC E20-335 exam training materials can help all candidates to pass the IT certification exam. Through the use of a lot of candidates, IT-Tests.com's EMC E20-335 exam training materials is get a great response aroud candidates, and to establish a good reputation. This is turn out that select IT-Tests.com's EMC E20-335 exam training materials is to choose success.

Life is full of choices. Selection does not necessarily bring you happiness, but to give you absolute opportunity. Once missed selection can only regret. IT-Tests.com's EMC E20-335 exam training materials are necessary to every IT person. With this materials, all of the problems about the EMC E20-335 will be solved. IT-Tests.com's EMC E20-335 exam training materials have wide coverage, and update speed. This is the most comprehensive training materials. With it, all the IT certifications need not fear, because you will pass the exam.

E20-335 (Symmetrix Solutions Specialist Exam for Implementation Engineers) Free Demo Download: http://www.it-tests.com/E20-335.html

NO.1 Open Replicator pull will be used to move data between a third party array and a Symmetrix V-Max
array.
What is recommended before starting the Open Replicator session?
A. Ensure that the remote devices are Host read/write enabled
B. Ensure that the control devices are Not Ready
C. Ensure that the remote devices are Host inaccessible
D. Ensure that the control devices are Write Disabled
Answer: C

EMC   E20-335   E20-335

NO.2 Which file contains the parameter that can change the default behavior of SYMCLI operations, and
there control actions?
A. SYMCLI options File
B. SYMAPI Options File
C. SYMCLI Command File
D. SYMAPI Command File
Answer: B

EMC   E20-335 demo   E20-335   E20-335 questions

NO.3 Diagnostic messaging for the GNS daemon is written to which file?
A. /7SYMAPI/emc/storgnsd .log0
B. /SYMAPI/log/storgnsd.log0
C. /SYMAPl/usr/storgnsd log0
D. /SYMAPl/bin/storgnsd log0
Answer: B

EMC answers real questions   E20-335 questions   E20-335

NO.4 In symmetric V-max series array running Enginuity 5874, which device is used as a pass-through
device for Auto provisioning?
A. VDEV
B. VCM
C. ACLX
D. SFS
Answer: C

EMC   E20-335 certification   E20-335 test   E20-335

NO.5 Refer to the exhibit.
A database server has its logs stored on a volume on the log source Symmetrix V-Max array and its data
stored on a volume on the data source Symmetrix V-Max array. Both source Symmetrix V-Max array
frames replicate data to the target Symmetrix V-Max array at the Remote site. There are two device
groups that have been defined:
One group for the data volume on the Symmetrix containing the data LUNs
One group for the log volume on the Symmetrix containing the log LUNS
What happens if the SRDF inks between the Symmetrix contain the data LUNs and the target Symmetrix
were to fail?
A. The R2 data in the database remains consistent because Enginuity Consistency Assist (RDFECAJ
technology would ensure data consistency).
B. The data in the database becomes inconsistent at the Remote site.
C. An SRDF failover would be initiated on all volumes and processing will automatically be switched over
to the Remote site
D. The R2 volumes in the Symmetrix V-Max containing the log LUNs would become write-disabled to the
database server
Answer: C

EMC questions   E20-335   E20-335   E20-335 study guide   E20-335 exam

NO.6 What is required to ensure the integrity of data on the R2 volume during a SRDF fallback operation?
A. Remove entries from the file system table
B. Stop any applications that are accessing the R2 volume
C. Disable journaling on the file system
D. Suspend the RDF link
Answer: B

EMC test   E20-335 questions   E20-335 exam dumps   E20-335

NO.7 How does Delta Set Extension help in an SRDF/A deployment?
A. Reduces RPO
B. Reduces the amount of required cache
C. Improves response time
D. Absorbs bursts of host writes
Answer: D

EMC   E20-335 exam   E20-335

NO.8 What is recommended before creating a TimeFinder/Mirror replica?
A. Ensure that the production application using the source devices is shut down
B. Ensure that all writes from the production application using the source devices are paused!
C. Ensure that the BCVs are not being actively accessed
D. Set the BCVs to a Not Ready state
Answer: Chttp://www.scribd.com/doc/37352326/Emc-Study-2

NO.9 An SRDF failover has been executed during the testing phase of an implementation. What is the
expected status of the R1 and R2 devices after performing SRDF failover operation?
A. R1 and R2 Not Ready
B. R1 Wnte Disabled; R2 Read/Wnte
C. R1 Read/Wnte, R2 Read/Wnte
D. R1 Read/Wnte. R2 Wnte Disabled
Answer: Bhttp://www.scribd.com/doc/29541661/Srdf-Operations-white-Paper

NO.10 Where is the volume Logix Database maintained starting with DMX-3?
A. VCM gatekeeper
B. Symmetrix logical Volume
C. Symmetrix File System
D. VCM database.
Answer: C

EMC test   E20-335 exam dumps   E20-335   E20-335 exam simulations

NO.11 Which command is used to set or reset HBA port flags on Symmetric arrays running Enable 7.0
Enginuity 5874?
A. symcfg
B. symmask
C. symconfigure
D. symaccess
Answer: D

EMC test answers   E20-335   E20-335 answers real questions

NO.12 One of the requirements, during an Open Replicator implementation is that production application
should not be implemented by open Replication session. An analysis of the control Symmetrix showed
that FA ports are currently 70% utilized. How should pace and ceiling be configured?
A. Pace should be set to 0 and Ceiling should be left at the default
B. Pace should be left at the default and Ceiling set to 30
C. Pace should be left at the default and Ceiling set to 100
D. Pace should be set to 9 and Ceiling should be set to 70
Answer: B

EMC certification training   E20-335   E20-335

NO.13 You have been asked to create a configuration for a single engine Symmetric V-Max array with 8 DAEs
and 64 drivers. They would like to have the data devices with RAID 5(7+1) protection.
What would be the largest number of members you would recommend for a stripped metavolume.?
A. 4
B. 16
C. 8
D. 32
Answer: B

EMC   E20-335   E20-335 exam prep   E20-335 test questions

NO.14 Refer to the exhibit
What is the correct state for the Standard and Rl-BCV prior to issuing a symreplicate start command?
A. Synchronized
B. Suspended
C. Split
D. Write-Enable
Answer: C

EMC   E20-335   E20-335 test answers   E20-335 test

NO.15 On the Symmetrix platform, which type of RAID protection ensures the best random write performance?
A. RAID 1
B. RAID S
C. RAID 6
D. RAID 5
Answer: A

EMC   E20-335 test answers   E20-335

IT-Tests.com offer the latest 1z0-457 Questions & Answers and high-quality 642-384 PDF Practice Test. Our 000-226 VCE testing engine and EX0-101 study guide can help you pass the real exam. High-quality 1Z0-027 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/E20-335.html